Edge banding is a commonly used material in furniture manufacturing and decoration, used for edging and protecting the edges of boards. The following will describe the processing technology of edge banding in about 900 words. The processing technology of edge banding usually includes the following steps: material selection, cutting, trimming, gluing, laminating, pressing, finishing and polishing. Each step is crucial to ensure the quality and appearance of edge banding. First of all, material selection is the first step in edge banding processing. Commonly used edge banding materials include PVC, ABS, acrylic, etc., and suitable materials are selected according to needs. When selecting materials, it is necessary to consider the quality, color and texture of the material and the degree of matching with the board. Next is cutting and trimming. According to needs, the selected edge banding is cut into appropriate lengths and widths. Then use a planer or trimming machine to trim the edge banding to ensure that the edges are flat and smooth for subsequent gluing and laminating work. Gluing is one of the key steps in edge banding processing. Use a dedicated glue coating equipment to evenly apply glue on the bottom or both sides of the edge banding. The choice of glue should take into account its viscosity, durability and compatibility with the edge banding material. Then the edge banding is applied. Place the glued edge banding on the edge of the board and ensure alignment. Use a special press or manual press tool to press the edge banding to ensure it is firmly bonded to the board. After the pressing is completed, trimming work is carried out. Use a trimming machine or manual trimming tool to trim the top and bottom of the edge banding to make it flush with the surface of the board. This step is very important to ensure the appearance and quality of the edge banding. Finally, polishing work is carried out. Use a polishing machine or manual polishing tool to polish the edge banding to make its surface smooth and remove
